Thermaltake Toughpower GX1 500W
Built to deliver 80 PLUS Gold efficiency, Toughpower GX1 comes with capacities ranging from 500W to 700W, and the application of 120mm Fluid Dynamic Bearing Fan, <+3% tight voltage regulation, Japanese 105C/221F main capacitors and premium components. Its near silent operation, trouble free installation and reliable performance are making itself one of the best values for basic system upgrades.
80 PLUS Gold Certified and Intel C6/C7 States Ready
Toughpower GX1 saves energy through its high energy efficiency up to 90% and is certified to 80 PLUS Gold. The series has been optimized to work with all generations of Intel's processors to achieve maximum energy saving.
Ultra Quiet 120mm Fluid Dynamic Bearing Fan
Featuring an 120mm Fluid Dynamic Bearing Fan to kept friction at really low levels even after prolonged usage while guaranteeing superior cooling performance and silent operation.
Low Ripple Noise
The maximum ripple/noise is lower than 60mV on the +12V rail, and lower than 40mV on the +5V &+3.3V rails to ensure an excellent power supply stability. Low ripple noise will keep your performance-critical components, such as high-end graphics cards, to operate reliably for longer.
<+3% Strict Voltage Regulation
The voltage regulation of the PSU is set to no more than +3% for major rails to meet the highest performance. The strict voltage regulation is better than Intel's standard +5% for major rails and +10% for -12V.
Sophisticatedly Designed Exterior Shroud
Sophisticatedly designed exterior shroud stimulates the aesthetic of your power supply while protecting the inner components from a direct contact.
Comes with multiple connectors that power the system at an advantageous voltage and make cable installation an easy task.
High Quality Japanese 105C/221F Main Capacitor
Comes with high quality 105C (221F) Japanese main capacitor to greatly improve the durability and offer the highest stability and reliability.
High Amperage Single +12V Rail & DC to DC Design
Powerful single +12V rail and DC to DC design ensure a stable and reliable supply to other PC components.
(Peak Output Capacity: 600W)
ATX 12V v2.4 and EPS v2.92
1 x 24 pin Main Power (600mm)
1 x 4+4 pin ATX 12V (650mm)
6 x 5 pin SATA (500mm + 150mm + 150mm)
2 x 6+2 pin PCI-E(500mm + 150mm)
4 x 4 pin Peripheral (500mm + 150mm + 150mm + 150mm + 150mm)
1 x 4 pin FDD (500mm + 150mm + 150mm + 150mm + 150mm)
Active PFC (Power Factor Correction)
Power Good Signal
Hold Up Time
> 12msec at 80% of full load
Input Frequency Range
47Hz - 63Hz
100V - 240V
0C to + 40C
20% to 90%
-20C to +70C
5% to 95%, non-condensing
120mm Fluid Dynamic Bearing Fan
80 PLUS Gold
100,000 hrs minimum
Dimension ( W / H / D )
150mm x 86mm x 140mm